Hitec RDX2 Mini 100W 4 Cell (4S) Dual Port LiPo AC Charger

Description

RDX2 Mini 100W 4 Cell (4S) Dual Port LiPo AC Charger from Hitec – HRC44299

The Hitec RDX2 Mini is a two-channel charger, featuring independent circuits which allow the user to charge two batteries simultaneously, regardless of chemistry or capacity. With a powerful, combined 100 watt charging output and 5A current, the RDX2 Mini offers the punch needed to charge 2-4 cell packs at an affordable price. The convenient front-loading design has the balancing and XT60 ports readily accessible for ease of operation at your workshop, flying field or race pit. Additional features include AGM and Cold Charge Modes to charge conventional lead-based and absorbed glass mat batteries safely and easily in cold conditions.

Note: We recommend reading this Motion RC knowledge blog article about charger amperage and wattage ratings.

Features:

• User-Friendly LCD Interface
• Stores 10 Different Battery Memory Charge/Discharge Profiles
• AGM and Cold Charge Modes
• Terminal Voltage Control
• Built-in Balance Connector
• Balance, Standard, Fast and Storage Modes for All Lithium Battery Chemistries
• Re-Peak Charge Mode and Delta-Peak Sensitivity For NiMH/NiCd Batteries
• Optional Temperature Sensor for NiCd/NiMH Charging
• Two (2) Built-in XT60 Connectors
• Smart Ventilation Fan

Includes:

• Hitec RDX2 Mini 100W 4 Cell (4S) Dual Port LiPo AC Charger
• AC Power Cord
• 2x T-Type Connector

** LiPo BATTERY CHARGER SAFETY WARNING **

Never, under ANY circumstances, leave your charger unattended while charging a LiPo battery. Keep the charger away from moisture, dust, direct sunlight, or any heat sources. The charger should always be placed on a heat-resistant, non-flammable surface during charging. Never overcharge or exceed a 1C charge current. A 1C charge current means the charge current equals the capacity of the battery. For example, a 2200mAh battery should never be charged using a current greater than 2.2 Amps (2200mAh).