Description
M2C Racing Tekno 16mm “ZRS” Zero Rebound System Shock Caps allow you to build an emulsion style zero rebound shock, coupled with the 16mm o-ring shock pistons M2C offers (M2C9650 series pistons).
These caps help with handling and a more stable landing off jumps and use the mugen shock bushing for simplified compatibility.
TIP: It is easier to remove the bushing from the old cap with the cap still on the shock.
INSTRUCTIONS:
Remove bleeder screw. Fill with oil to level with top of shock. Screw cap onto shock. Slowly push piston shaft up to top of stroke. Hold shaft up and put 2mm screw in (it is best to put screw in with a wrench and not a driver to avoid cross threading the screw).
NOTE: It is a good idea to check the shocks and rebleed if necessary to keep from building pressure due temperature changes during the day. This can also happen if you have a lower shock o-ring that is leaking.
*Video depicts Mugen shocks; assembly procedure is the same for all ZRS shock caps.
This product was added to our catalog on May 1, 2018
- Tekno RC EB48SL
- Tekno RC ET48 Original
- Tekno RC ET48.3
- Tekno RC MT410
- Tekno RC NB48 Original
- Tekno RC NB48.3
- Tekno RC NT48 Original
- Tekno RC NT48.3
- Tekno RC SCT410 Original
- Tekno RC SCT410.3
jonathan dvir Verified Owner Friday, Nov 8 2019 (about 5 years ago) M2C Tekno 16mm “ZRS” Zero Rebound System Shock Caps (4) I got them fits the tekno mt410 and
Nearly no bottoming out
Very satisfied 1 customer found this review helpful. Francis YAN Verified Owner Friday, Aug 16 2019 (about 6 years ago) M2C Tekno 16mm “ZRS” Zero Rebound System Shock Caps (4) Not fitting well… Spent an hour just to fit four shocks! 1 of 6 customers found this review helpful. View all reviews
Reviews
There are no reviews yet.