Pro-Line 6×30 to 12mm Aluminum Hex Adapters (2) (Wide)

Description

The Pro-Line 6×30 to 12mm wide aluminum hex adapters allow you to upgrade your Raid 6×30 removable hex wheels with super strong aluminum instead of plastic.This pack contains a pair of wide offset 12mm hexes (2wd Stampede/Rustler Front and 4×4 Stampede/Rustler Front and Rear) made from clear anodized Aluminum for your 6×30 2.8″ wheels. If you are always stripping your plastic hexes, then you need the durability that Aluminum Hexes provide. These Aluminum Hex Adapters are proudly Made in the USA. Get your 6×30 to 12mm Aluminum Hex Adapters today! 

Features:

• Aluminum Wide 6×30 to 12mm Hex Adapters
• Built to Take a Beating
• Clear Anodized Aluminum Looks Incredibly Impressive
• Fits any of Pro-Line’s 6×30 Removable Hex Wheels
• Wide fits Stampede®/Rustler® 2wd Front and Stampede®/Rustler® 4wd Front and Rear
• Made in the USA, since 1982

Includes:

• (2) Aluminum 6×30 to 12mm Wide Hex Adapters

This product was added to our catalog on April 1, 2019

• Traxxas Rustler 2wd
• Traxxas Rustler 4×4
• Traxxas Stampede 2wd
• Traxxas Stampede 4×4

Michael Goodall Saturday, Apr 10 2021 (about 4 years ago) Pro-Line 6×30 to 12mm Aluminum Hex Adapters (2) (Wide) I was using the 12mm plastic hex on my Rustler 4×4. Had one strip out. It was either the wheel nut loosened up or it just smoked the wheel adapapter. I was running 12mm aluminum hexes on HR alloy axles with 2.8 proline mx28s. So it hooked extremely hard and it’s rough on parts. Ordered these hubs in a 17mm option. They are machined absolutely perfectly. The fit and finish are unreal. The threads tapped for lug screws are perfect. Each part snaps together with a perfect fit. You will break everything else on the whole car before one of these lets go I’m sure. Ron Verified Owner Tuesday, Jun 1 2021 (about 4 years ago) Pro-Line 6×30 to 12mm Aluminum Hex Adapters (2) (Wide) These do not work if you run MIP axles. I am constantly stripping the plastic removable hexes so I thought an aluminum upgrade would suffice. Wrong. The MIP axle stub is a bit shorter than the stock plastic Traxxas axles. You are fine if you use the plastic removable hex. The aluminum hex is thicker than the plastic which is a good thing but on the MIP axles the wheel nut does not thread passed the Teflon lock. I tried them anyway with locktite. I stripped the aluminum ones as well. Lame. 0 of 3 customers found this review helpful. View all reviews